DIY: Steps to Successfully Building Your Own 6.8 SPC
By Dave Bahde
<div data-cycle-hash="68diy-lead" data-cycle-desc="With a Daniel Defense barrel, PWS' bolt, buffer and handguard, MicroMOA's gas block and more, this 6.8 SPC was born to run." data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-receiver" data-cycle-desc="The heart of this custom build was LRWC's forged and “double coined”
Six8 receiver set. The matched upper and lower receivers are designed to utilize affordable polymer Magpul PMAGs and ambidextrous controls." data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-1" data-cycle-desc="1. The author added BAD-EPS (Enhanced
Pin Set) from Battle Arms Development. " data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-2" data-cycle-desc="2. A tight barrel-to-receiver fit ensures solid accuracy downrange." data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-3" data-cycle-desc="3. Primary Weapons Systems offers a tool just for properly tightening the barrel nut. " data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-4" data-cycle-desc="4. The author installed a mid-length gas system optimized for 16-inch barrels." data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-5" data-cycle-desc="5. To tune the Govnah, first anchor its adjustment plate in a vise. " data-cycle-overlay-template="{{desc}}“>
<div data-cycle-hash="68diy-6" data-cycle-desc="6. Drilling holes in the Govnah's plate will give you options to adjust the gas system." data-cycle-overlay-template="{{desc}}“>
Leave a Reply