Armaspec XPDW Stock Review
By Mike Searson
By Mike Searson
The Armaspec XPDW stock gives you the PDW look without the hassle.
USA –
We installed our Armaspec XPDW on a Sharp’s Bros. Jack Lower which is built by Spike’s Tactical. The metallic Cerakote on the front half of the lower was masterfully done by Nevada Cerakote out of Minden, Nevada. www.nevadacerakote.com
Building this lower gave us a few challenges due to the front half and at first we were concerned with adding an unconventional stock, but it installed with no problems.
Armaspec XPDW Stock – The Bad
We did hit one snag on the build. Our end plate had dual sling loops and would not allow the stock to completely retract. We simply replaced it with a standard end plate with no extensions. The lack of additional sling points may be a negative factor to some, but the single point location on the XPDW was fine for our purposes.
This stock is only rated for use on 5.56/223 …Read the Rest
Source:: AmmoLand
Leave a Reply