Posted October 9, 2018 10:14 pm by Comments

By John Crump

Pinnacle 3-18x44 TMD Tactical Precision Riflescope Reticle

John gets some range time on the Sightmark Pinnacle 3-18×44 TMD Riflescope and gives us his feedback under West Virginia conditions.

Sightmark Pinnacle 3-18x44TMD Tactical Precision Riflescope Review

U.S.A.

Pinnacle 3-18×44 TMD Tactical Precision Riflescope Reticle Red Setting

Each click on the knobs of the Pinnacle is equal to .1mrads. This measurement is equal to 1cm at 100 meters (.36″ at 100 yards). This range gives the operator a lot of adjustment during long range shooting.

The Pinnacle 3-18x44TMD Tactical Precision Riflescope uses a TMD-HW Etched first focal plane reticle. Sightmark designed the reticle specifically for long-range shooting. I liked the design of the reticle once I figured out how to use it.

The vertical and horizontal mil scales of the Pinnacle scope is scaled in .5mil increments. The shooter will use these for range finding and holdover. At the top of the vertical mil scale and the right of the horizontal mil scale, the increments measure .2mil. For long range shooting, this is a must.

The drop lines of the Pinnacle scope contain a bunch of dots. These dots provide a reference point for windage holdover. I used these dots a lot when I was shooting. The crosshair is .03mil. This size makes aiming …Read the Rest

Source:: AmmoLand

Leave a Reply

Your email address will not be published.